Access Control - Draytek Vigor2110 Series User Manual

4 . 1 2 . 4 A c c e s s C o
4 . 1 2 . 4 A c c e s s C o
In the Access Control, the router may restrict wireless access to certain wireless clients only
by locking their MAC address into a black or white list. The user may block wireless clients
by inserting their MAC addresses into a black list, or only let them be able to connect by
inserting their MAC addresses into a white list.
In the Access Control web page, users may configure the white/black list modes used by
each SSID and the MAC addresses applied to their lists.
Enable Mac Address
Filter
MAC Address Filter
Client's MAC Address
Apply SSID
Attribute
Add
Delete
Edit
Cancel
n t r o l
n t r o l
Select to enable the MAC Address filter for wireless LAN
identified with SSID 1 to 4 respectively. All the clients
(expressed by MAC addresses) listed in the box can be grouped
under different wireless LAN. For example, they can be grouped
under SSID 1 and SSID 2 at the same time if you check SSID 1
and SSID 2.
Display all MAC addresses that are edited before.
Manually enter the MAC address of wireless client.
After entering the client's MAC address, check the box of the
SSIDs desired to insert this MAC address into their access
control list.
s: Isolate the station from LAN - select to isolate the wireless
connection of the wireless client of the MAC address from
LAN.
Add a new MAC address into the list.
Delete the selected MAC address in the list.
Edit the selected MAC address in the list.
Give up the access control set up.
232
Vigor2110 Series User's Guide