Draytek Vigor2110 Series User Manual page 203

Profile Name
Enable this profile
VPN Dial-Out Through
Netbios Naming Packet
Vigor2110 Series User's Guide
Specify a name for the profile of the LAN-to-LAN connection.
Check here to activate this profile.
Use the drop down menu to choose a proper WAN interface for
this profile. This setting is useful for dial-out only.
WAN1 First - While connecting, the router will use WAN1 as
the first channel for VPN connection. If WAN1 fails, the router
will use another WAN interface instead.
WAN1 Only - While connecting, the router will use WAN1 as
the only channel for VPN connection.
3G Backup Only - While connecting, the router will use 3G
modem as the only channel for VPN connection.
Pass – click it to have an inquiry for data transmission between
the hosts located on both sides of VPN Tunnel while
connecting.
Block – When there is conflict occurred between the hosts on
193