Draytek Vigor2110 Series User Manual page 147

SysLog
Advance Setting
Vigor2110 Series User's Guide
for Web Content Filter by checking the Log box. It will be
sent to Syslog server. Please refer to section Syslog/Mail
Alert for more detailed information.
For troubleshooting needs you can specify the filter log and/or
CSM log here. Check the corresponding box to enable the log
function. Then, the filter log and/or CSM log will be shown on
Draytek Syslog window.
Click Edit to open the following window. However, it is
strongly recommended to use the default settings here.
Codepage - This function is used to compare the characters
among different languages. Choose correct codepage can help
the system obtaining correct ASCII after decoding data from
URL and enhance the correctness of URL Content Filter. The
default value for this setting is ANSI 1252 Latin I. If you do
not choose any codepage, no decoding job of URL will be
processed. Please use the drop-down list to choose a
codepage.
If you do not have any idea of choosing suitable codepage,
please open Syslog. From Codepage Information of Setup
dialog, you will see the recommended codepage listed on the
dialog box.
Window size – It determines the size of TCP protocol
(0~65535). The more the value is, the better the performance
137