Draytek Vigor2110 Series User Manual page 78

Account Number/Name
Authentication ID
Password
Expiry Time
NAT Traversal Support
Ring Port
Ring Pattern
Prefer Codec
Enter your account name of SIP Address, e.g. every text before
@.
Check the box to invoke this function and enter the name or
number used for SIP Authorization with SIP Registrar. If this
setting value is the same as Account Name, it is not necessary
for you to check the box and set any value in this field.
The password provided to you when you registered with a SIP
service.
The time duration that your SIP Registrar server keeps your
registration record. Before the time expires, the router will send
another register request to SIP Registrar again.
If the router (e.g., broadband router) you use connects to
internet by other device, you have to set this function for your
necessity.
None – Disable this function.
Stun – Choose this option if there is Stun server provided for
your router.
Manual – Choose this option if you want to specify an external
IP address as the NAT transversal support.
Nortel – If the soft-switch that you use supports Nortel solution,
you can choose this option.
Set Phone1 or Phone2 as the default ring port for this SIP
account.
Choose a ring tone type for the VoIP phone call.
Select one of five codecs as the default for your VoIP calls. The
codec used for each call will be negotiated with the peer party
before each session, and so may not be your default choice. The
default codec is G.729A/B; it occupies little bandwidth while
maintaining good voice quality.
If your upstream speed is only 64Kbps, do not use G.711 codec.
It is better for you to have at least 256Kbps upstream if you
would like to use G.711.
68
Vigor2110 Series User's Guide