Draytek Vigor2110 Series User Manual page 49

PPP Client Mode - Click Enable to activate this mode for WAN2.
SIM PIN code - Type PIN code of the SIM card that will be used to
access Internet.
Modem Initial String - Such value is used to initialize USB modem.
Please use the default value. If you have any question, please contact
to your ISP.
APN Name - APN(Access Point Name) is provided by your ISP for
identifying different access points. Simply click Apply to apply such
name. Finally, you have to click OK to save the setting.
Apply – Activate the function of identification.
Modem Dial String - Such value is used to dial through USB mode.
Please use the default value. If you have any question, please contact
to your ISP.
PPP Username - Type the PPP username (optional).
PPP Password - Type the PPP password (optional)
PPP Authentication – Select PAP only or PAP or CHAP for PPP.
WAN Connection Detection - Such function allows you to verify
whether network connection is alive or not through ARP Detect or
Ping Detect.
Mode – Choose ARP Detect or Ping Detect for the system to
execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you have to
type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference. TTL value
is set by telnet command.
39
Vigor2110 Series User's Guide