Draytek Vigor2110 Series User Manual page 174

To activate the function of limit session, simply click Enable and set the default session limit.
Enable
Disable
Default Max Sessions
Default Max P2P
Sessions
Limitation List
Start IP
End IP
Maximum Sessions
Maximum P2P Sessions
Add
Click this button to activate the function of limit session.
Click this button to close the function of limit session.
Defines the default session number used for each computer in
LAN.
Defines the default session number used for P2P application.
Displays a list of specific limitations that you set on this web
page.
Defines the start IP address for limit session.
Defines the end IP address for limit session.
Defines the available session number for each host in the
specific range of IP addresses. If you do not set the session
number in this field, the system will use the default session
limit for the specific limitation you set for each index.
Defines the available session number for P2P application.
Adds the specific session limitation onto the list above.
164
Vigor2110 Series User's Guide