Dual-Port G.shdsl Chassis - Juniper J2300 Getting Started Manual

J2300, J4300, and J6300 Services Router Getting Started Guide
Table 22: Status LEDs for T1 and E1 Ports
Color
Green
Red
Unlit
Table 23: Status LED for ISDN BRI Port
Color State
Green
On steadily
Red Disconnected
Unlit Off

Dual-Port G.SHDSL Chassis

The J2300 Dual-Port G.SHDSL chassis has two Fast Ethernet LAN ports
and two G.SHDSL WAN ports, as shown in Figure 22. The G.SHDSL ports
provide symmetric high-speed digital subscriber line (SHDSL) interfaces to
ATM network media for ATM-over-SHDSL connections.
Figure 22: J2300 G.SHDSL Chassis
J2300
ALARM
POWER ON
The G.SHDSL chassis provides the following key features:
NOTE: Contact the Juniper Networks Technical Assistance Center (JTAC) before
implementing 1-port four-wire mode.
46
J2300 Chassis with Fixed PIMs
State
On steadily
On steadily
Off
Description
PIM is online and operational.
PIM is not operational and needs replacement.
PIM is offline.
USB
CONSOLE
CONFIG
Onboard network processor
2-port two-wire mode and 1-port four-wire mode
Description
Online with no alarms or failures.
Active with a local alarm. The router has detected
a failure.
Offline.
PORT 0 PORT 1 PORT 2
STATUS
STATUS
PORT 3