Field-Replaceable Pims - Juniper J2300 Getting Started Manual

Table 25: Status LEDs for G.SHDSL Ports
Color State
Green On steadily
Red On steadily
Table 26: Status LED for ISDN BRI Port
Color State
Green On steadily
Red Disconnected
Unlit Off

Field-Replaceable PIMs

PIMs are removable and insertable only when the Services Router is powered off.
You can install a PIM into one of the six slots in the router chassis. If a slot is not
occupied by a PIM, a PIM blank panel must be installed to shield the empty slot and
to allow cooling air to circulate properly through the router.
These Services Routers support the types of PIMs summarized in Table 27 and
described in the following sections:
Description
PIM is online and operational.
PIM is not operational and needs replacement.
PIM is offline.
Field-Replaceable PIM Summary on page 50
Dual-Port Serial PIM on page 51
Dual-Port T1 or E1 PIM on page 52
Dual-Port Channelized T1 or E1 PIM on page 53
T3 or E3 PIM on page 55
Dual-Port Fast Ethernet PIM on page 57
4-Port ISDN BRI PIMs on page 58
ADSL PIM on page 59
G.SHDSL PIM on page 61
Physical Interface Modules Overview
Description
Online with no alarms or failures.
Active with a local alarm. The router has detected a failure.
Field-Replaceable PIMs
49