Laser And Led Safety Guidelines And Warnings; General Laser Safety Guidelines; Class 1 Laser Product Warning - Juniper J2300 Getting Started Manual

¡Atención! No usar una rampa inclinada más de 10 grados
Varning! Använd inte ramp med en lutning på mer än 10 grader.

Laser and LED Safety Guidelines and Warnings

Single-mode Physical Interface Modules (PIMs) are equipped with laser transmitters,
which are considered a Class 1 Laser Product by the U.S. Food and Drug
Administration, and are evaluated as a Class 1 Laser Product per EN 60825–1 +A11
+A2 requirements.
Observe the following guidelines and warnings:

General Laser Safety Guidelines

When working around PIMs, observe the following safety guidelines
to prevent eye injury:
WARNING: Unterminated optical connectors can emit invisible laser radiation.
The lens in the human eye focuses all the laser power on the retina, so focusing
the eye directly on a laser source—even a low-power laser—could permanently
damage the eye.

Class 1 Laser Product Warning

WARNING: Class 1 laser product.
General Laser Safety Guidelines on page 243
Class 1 Laser Product Warning on page 243
Class 1 LED Product Warning on page 244
Laser Beam Warning on page 245
Radiation from Open Port Apertures Warning on page 246
Do not look into unterminated ports or at fibers that connect to unknown
sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
Safety and Regulatory Compliance Information
Safety Guidelines and Warnings
243