Juniper J2300 Getting Started Manual page 147

NOTE: After initial configuration is complete, the Services Router stops functioning
as a DHCP server. If you change the IP address of
management device configured to use DHCP, you lose your DHCP lease and your
connection to the router through the J-Web interface. To reestablish a connection,
either set the IP address on the management device manually, or connect
to the management network and access the router another way—for example,
through the console port.
5.
Table 47: Set Up Quick Configuration Summary
Field
Identification
Host Name (required)
Domain Name
Root Password (required)
Verify Root Password (required)
Time
Time Zone
NTP Servers
To apply the configuration and return to the Quick Configuration page,
click OK.
To cancel your entries and return to the Quick Configuration page,
click Cancel.
To check the configuration, see "Displaying Basic Connectivity Configurations"
on page 132.
Function
Defines the hostname of the router.
Defines the network or subnetwork that
the machine belongs to.
Sets the root password that user "root"
can use to log in to the router.
Verifies the root password has been
typed correctly.
Identifies the time zone that the router
is located in.
Specify an NTP server that the router
can reach to synchronize the system
time.
Configuring Basic Settings with J-Web Quick Configuration
Establishing Basic Connectivity
and have the
fe-0/0/0
Your Action
Type the hostname.
Type the domain name.
Type a plain-text password that the
system encrypts.
After a root password has been
NOTE:
defined, it is required when you log in
to the J-Web user interface or the CLI.
Retype the password.
From the list, select the appropriate
time zone.
To add an IP address, type it in the box
to the left of the Add button, then click
Add.
To delete an IP address, click on it in the
box above the Add button, then click
Delete.
fe-0/0/0
125