Juniper J2300 Getting Started Manual page 161

In the J-Web user interface, select Configuration>Quick
2.
Configuration>Secure Access.
Enter information into the Secure Access Quick Configuration page, as
3.
described in Table 51.
Click one of the following buttons:
4.
To apply the configuration and stay on the Quick Configuration page,
click Apply.
To apply the configuration and return to the Quick Configuration page,
click OK.
To cancel your entries and return to the Quick Configuration page,
click Cancel.
To verify that Web access is enabled correctly, connect to the Services Router
5.
using one of the following methods:
For HTTP access—In your Web browser, type
.
address
For HTTPS access—In your Web browser, type
.
address
For SSL JUNOScript access—A JUNOScript client such as JUNOScope is
required. For information about how to log in to JUNOScope, see the
JUNOScope Software User Guide.
To verify the secure Web access configuration, see "Verifying Secure Web
6.
Access" on page 142.
Configuring Secure Web Access with Quick Configuration
Configuring Secure Web Access
or
http:// URL http:// IP
or
https:// URL https:// IP
139