Juniper J2300 Getting Started Manual page 29

Table 5: Summary of J-series Features and License Requirements (continued)
Feature Category J-series Feature
Encapsulation Ethernet:
Synchronous Point-to-Point Protocol (PPP)
Frame Relay
High-level Data Link Control (HDLC)
Serial encapsulation over RS-232, RS-449, X.21, V.35, and EIA-530
connections
802.1Q filtering and forwarding
Multilink Frame Relay
Multilink PPP
Data link switching (DLSw)
Traffic Management Policing and shaping
Class-based queuing with prioritization
Weighted random early detection (WRED)
Queuing by virtual LAN (VLAN), data link connection identifier (DLCI),
interface, or bundle
Common Criteria
Security
Network attack detection
Denial-of-service (DoS) and distributed DoS protection
Generic routing encapsulation (GRE), IP-over-IP, and IP Security (IPSec)
tunnels
Advanced Encryption Standard (AES) 128-, 192-, and 256-bit.
56-bit Data Encryption Standard (DES) and 168-bit 3DES encryption
MD5 and Secure Hash Algorithm (SHA-1) authentication
Replay attack prevention
Stateful firewall packet filters
Network Address Translation (NAT)
Voice Support Compressed Real-Time Transport Protocol (CRTP)
Media access control (MAC) encapsulation
802.1p tagging
Point-to-Point Protocol over Ethernet (PPPoE)
Asynchronous Transfer Mode (ATM) for asymmetric digital subscriber
line (ADSL) or symmetric high-speed digital subscriber line (SHDSL)
Circuit cross-connect (CCC)
Translational cross-connect (TCC)
Overview of J2300, J4300, and J6300 Services Routers
J-series Software Features and Licenses
Separate License
License required
7