Chapter 7 Establishing Basic Connectivity; Basic Connectivity Terms - Juniper J2300 Getting Started Manual

Chapter 7
Establishing Basic Connectivity

Basic Connectivity Terms

The JUNOS software is preinstalled on the Services Router. When the router is
powered on, it is ready to be configured. If the router does not have a configuration
from the factory or your service provider, you must configure the software to
establish basic connectivity.
If you are setting up a Services Router for the first time, you can use either J-Web
Quick Configuration or a configuration editor to configure basic connectivity. For a
brief explanation of J-Web Quick Configuration and the J-Web and CLI configuration
editors, see "Services Router User Interface Overview" on page 63.
If you are setting up many Services Routers, autoinstallation can help automate
the configuration process. For more information about autoinstallation, see
"Configuring Autoinstallation" on page 145.
This chapter contains the following topics. For more information about basic
connectivity, see the JUNOS System Basics Configuration Guide.
Basic Connectivity Terms on page 111
Basic Connectivity Overview on page 112
Before You Begin on page 116
Connecting to a Services Router on page 117
Configuring Basic Settings with J-Web Quick Configuration on page 124
Configuring Basic Settings with a Configuration Editor on page 127
Verifying Basic Connectivity on page 132
Before configuring basic connectivity, become familiar with the
terms defined in Table 46.
Basic Connectivity Terms
111