Replacing And Troubleshooting Hardware Components; Replacing Hardware Components; Tools And Parts Required - Juniper J2300 Getting Started Manual

Chapter 11
Replacing and Troubleshooting Hardware
Components

Replacing Hardware Components

Tools and Parts Required

Because many of the Services Router's hardware components are field-replaceable
units (FRUs), you can remove and replace them yourself. When you need to replace
a router component, contact your customer support or sales representative to order
the field-replaceable unit (FRU) that contains the component. For instructions, see
"Contacting Customer Support and Returning Hardware" on page 191.
This chapter contains the following topics:
Replacing Hardware Components on page 163
Troubleshooting Hardware Components on page 188
This section contains the following topics:
Tools and Parts Required on page 163
Replacing the Console Port Cable on page 164
Replacing a PIM on page 164
Replacing PIM Cables on page 168
Removing and Installing the Primary Compact Flash Disk on page 169
Removing and Installing the Removable Compact Flash Disk on page 171
Removing and Installing the USB Storage Device on page 173
Removing and Installing DRAM Modules on page 175
Replacing Power System Components on page 179
To replace hardware components, you need the tools and parts listed in Table 57.
Replacing Hardware Components
163