Juniper J2300 Getting Started Manual page 152

J2300, J4300, and J6300 Services Router Getting Started Guide
Table 49: Configuring Basic Settings (continued)
Task
Add each domain that the router
belongs to.
Define the backup router to be used
when the router is booting or the routing
protocol processes are not running.
130
Configuring Basic Settings with a Configuration Editor
J-Web Configuration Editor
1. Next to Domain search, click Add
New Entry.
2. In the Value box, type the name
of the domain in which the
router is located—for example,
lab.router.net.
3.
Click OK.
4. Next to Domain search, click Add
New Entry.
5. In the Value box, type the name
of another domain that the
router belongs to—for example,
router.net.
6. Click OK.
In the Backup router section, next
to Address, type the IP address of
the backup router—for example,
192.168.2.44.
CLI Configuration Editor
Set the domains to be searched. For
example:
set domain-search lab.router.net
set domain-search router.net
Set the address for the backup router.
For example:
set backup router address
192.168.2.44