Versatile Interface Modules (VIM5) Port LEDs
the operational speed of a port. Color and blink pattern indicate speeds, as referenced
by the following table:
Table 23: Port LEDs in SPD Mode
Color/State
Blinking amber
Slow blinking green
Steady green
Blinking green
Steady amber
Steady green
Blinking amber
Blinking green
Versatile Interface Modules (VIM5) Port LEDs
There are two supported modes for ExtremeSwitching VIM5 port LEDs:
•
SYS - default, use normal port LED behavior for link, traffic, and PoE
•
SPD – use the port LEDs to indicate operational speed
VIM5 Port LEDs in Default (SYS) Mode
In the default SYS mode, SPD is OFF, and the port status will display behavior for link,
traffic, and PoE as described in the following table:
Table 24: VIM5 Port LEDs in SYS Mode (default)
Color/State
Steady green
Blinking green
Slow blinking green
Off
VIM5 Port LEDs in SPD Mode
SPD mode is used to help determine the operational speed of a port. Color and blink
pattern indicate speeds, as referenced by the following table:
Table 25: VIM5 Port LEDs in SPD Mode
Color/State
Steady green
Blinking green
74
VSP 4900 Series Switches: Hardware Installation Guide
Meaning
Link is OK; port is not powered
Link is OK and transmitting packets; port is not powered
Port is admin disabled
Port is not powered, has no link
Monitoring the Switch
Speed
2.5Mbps
5Mbps
10Mbps
100Mbps
1000Mbps
10Gbps
25Gbps
40Gbps
Speed
10Gbps
40Gbps