10G4Xa I/O Module - Extreme Networks BlackDiamond 8806 Hardware Installation Manual

BlackDiamond 8000 Series Modules

10G4Xa I/O Module

The 10G4Xa I/O module
Figure 21: 10G4Xa I/O Module
10GBASE-X XFP
Module status LEDs
In the default configuration of the 10G4Xa I/O module, all ports:
Are added to the default VLAN as untagged
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
●
The 10G4Xa I/O module has the following LEDs:
Module status
●
Module diagnostics
●
Port status
●
For information about the LEDs and their activity on the 10G4Xa I/O module, see
on page 53. For information about the XFP interfaces, see the Extreme Networks Pluggable Interface
Modules Installation Guide.
38
(Figure 21) has four XFP-based 10-gigabit Ethernet ports.
10 Gbs ports
BlackDiamond 8800 Series Switches Hardware Installation Guide
10G4Xa 10G4Xa 41612
BD_155
"I/O Module LEDs"