Cdr Abbreviations - Dialogic Vision CX Video Administration Manual

Dialogic® Vision™ CX Video Gateway Administration Manual

CDR abbreviations

The following table describes the CDR abbreviations:
Abbreviation Description
at Call duration
ci Call identifier.
di Destination information or DNIS in one of the following formats:
•
•
For example:
di=1290
dn Call description.
dt Destination type. Defaults to e64 or to a URI.
et Service end time, in GMT format. For example:
et=2007-11-08T08:00:58.345Z
se Source type. Defaults to e164 or can be a URI. For example:
se=e164
si Source information or ANI.
st Service start time, in GMT format. For example:
st=2007-11-08T08:00:51.355Z
tc Termination code.
Valid values:
•
1016: Normal call clearing
•
0017: Busy
•
0018: No answer
•
0038: Network out of order
•
0041: Telephony error (system error)
vcm Call mode.
Valid values:
•
Voice
•
Video
vct Call type.
Valid values:
•
Inbound
•
Outbound
•
transfer
vpc Caller identification for the parent call when the transferred occurred.
Dialogic
Full ITU-T Recommendation E.164 telephone number (11 numeric digits)
URL (12 digits)
Managing the CX Video Gateway
93