Logging Defaults; Changing The Logging Level; Changing Other Logging Defaults; Log File Format - Dialogic Vision CX Video Administration Manual

Dialogic® Vision™ CX Video Gateway Administration Manual

Logging defaults

The gateway system logging defaults are:
The logging level is set to INFO1, which displays events encountered during
•
typical gateway operations.
The log files are stored in the vx/callserver/logs directory.
•
The maximum number of log files in the log directory is 50. If the log
•
directory contains 50 log files, then the oldest log file is deleted when the 51st
log file is added.
The maximum size of a log file is 10 MB. When a log file reaches this size, a
•
new file is started.

Changing the logging level

To change the gateway logging level, follow these steps:
Step Action
1 Access the Vision™ Console, as described in Accessing the Vision Console on page 33.
2 Click Maintenance on the Operations menu.
The Maintenance page appears.
3 To change the log level, select the desired log level in the Log level field, and click Submit.

Changing other logging defaults

The following table describes how to change the other logging defaults:
To change the...
Log file location
Maximum number of log files in the specified
directory
Maximum size of the log file
For more information about the callserver.conf file, see the Dialogic® Vision™ Call
Server Administration Manual.

Log file format

The format of each log message is:
timestamp [severity] [origin:code] [UID:threadID] (alarm) [message]
where timestamp is formatted in local server time by default.
For example, a telecom configuration error might lead to the following log file entry:
03/29/05 06:59:25.306 [ERROR] [telecom.pkg:111] [-:1044] (ConfigurationError) -
A trunk is declared with an unavailable protocol, line 16.
Use the SystemLogTime setting in the callserver.conf file to change the time format
to Greenwich Mean Time (GMT). This also changes the time format in the log file
name. For information, see the Dialogic® Vision™ Call Server Administration Manual.
Dialogic
Managing the CX Video Gateway
Modify the...
LogDir setting in the callserver.conf file.
SystemLogFileMaxNum setting in the callserver.conf
file.
SystemLogFileMaxSize setting in the callserver.conf
file.
85