Sip/Rtp Parameters - Dialogic Vision CX Video Administration Manual

Dialogic® Vision™ CX Video Gateway Administration Manual

SIP/RTP parameters

The SIP/RTP parameters page configures SIP-related settings. Access this page by
clicking SIP/RTP on the Configuration menu.
Group Associated
implementations
General All
Board All
#0
Board Implementations where
#1 the gateway has two
media boards
Board Implementations where
#2 the gateway has three
media boards
Audio All
codecs
Video Video models
codecs
Dialogic
Parameter Description
Transport Defines whether outbound SIP calls are
protocol sent using TCP or UDP.
Session level Proposed bandwidth to be used by the
bandwidth session.
control
The format for this parameter is:
b=<modifier>:<bandwidth-value>.
For more information on the format, see
RFC 4566 section 5.8.
Audio codec Proposed bandwidth to be used by the
bandwidth audio media stream.
control
The format for this parameter is:
b=<modifier>:<bandwidth-value>.
For more information on the format, see
RFC 4566 section 5.8.
Video codec Proposed bandwidth to be used by the
bandwidth video media stream.
control
The format for this parameter is:
b=<modifier>:<bandwidth-value>.
For more information on the format, see
RFC 4566 section 5.8.
IP address IP address of media board 0.
Subnet mask Subnet mask for media board 0.
Gateway IP address of the router for media board 0.
IP address IP address of media board 1.
Subnet mask Subnet mask for media board 1.
Gateway IP address of the router for media board 1.
IP address IP address of media board 2.
Subnet mask Subnet mask for media board 2.
Gateway IP address of the router for media board 2.
Priority 1 - Order of the audio codecs presented in
Priority 7 outbound SIP messages generated by the
CX Video Gateway. Priority 1 is the highest
priority.
Priority 1 - Order of the video codecs presented in
Priority 4 outbound SIP messages generated by the
CX Video Gateway. Priority 1 is the highest
priority.
Vision™ Console parameters
43