Video Transcoder Status - Dialogic Vision CX Video Administration Manual

Dialogic® Vision™ CX Video Gateway Administration Manual

Video Transcoder status

The Video Transcoder status page displays status information for the video
transcoder.
Group Field
Server Active
information channels
Active
gateways
Usage
level
Errors
Warnings
System
Version
information
Startup
time
Uptime
Channels
Active gateway
ID
information
State
Name
Host
Channels
Startup
time
Dialogic
Description
Number of full-duplex video transcoder channels currently in use.
Number of gateways currently using video transcoder channels.
Current CPU usage level of the video transcoder system.
Number of errors generated since the video transcoder was last started.
Number of warnings generated since the video transcoder was last
started.
Version of the video transcoder.
Time the video transcoder was last started in coordinated universal time
(UTC).
Total time in days, hours, and minutes since the video transcoder was
last started.
Maximum number of full-duplex video transcoder channels that have
been configured for use on this system.
Note: The number of channels configured for use may be less than or
equal to the maximum allowed by the license. The number of channels
available for the system is defined in the Video Transcoder on page 52
page of the Configuration menu.
ID of the gateway.
Current overall state of the gateway.
Name of the application running on the gateway.
Host name of the gateway.
Number of full-duplex channels in use for the active gateway.
Time the gateway was connected to the video transcoder in coordinated
universal time (UTC).
Vision™ Console parameters
61