Host Ip Information - Dialogic Vision CX Video Administration Manual

Dialogic® Vision™ CX Video Gateway Administration Manual

Host IP information

The Host IP information page configures the IP network settings for the CX Video
Gateway. Access this page by clicking Host IP information on the Configuration
menu.
Group Parameter
Eth0 Status
DHCP setting
IP address
Subnet mask
Gateway
Eth1 Status
DHCP setting
IP address
Subnet mask
Gateway
Hostname Hostname
DNS Server #1 -
servers Server #3
Dialogic
Description
Indicates whether the first Ethernet interface on the CX Video
Gateway is activated when the gateway starts up.
Indicates whether DHCP is enabled for the first Ethernet interface.
IP address for the first Ethernet interface on the CX Video Gateway,
if DHCP is not enabled.
Subnet mask for the first Ethernet interface on the CX Video
Gateway, if DHCP is not enabled.
IP address of the default gateway for the CX Video Gateway network
card, if DHCP is not enabled.
Indicates whether the second Ethernet interface on the CX Video
Gateway is activated when the gateway starts up.
Indicates whether DHCP is enabled for the second Ethernet interface.
IP address for the second Ethernet interface on the CX Video
Gateway, if DHCP is not enabled.
Subnet mask for the second Ethernet interface on the CX Video
Gateway, if DHCP is not enabled
IP address of the router for the CX Video Gateway network card, if
DHCP is not enabled.
Host name for the CX Video Gateway.
IP addresses of the domain name servers for the CX Video Gateway.
Vision™ Console parameters
41