Related Manuals for Dialogic Integrated Media Gateways IMG 1010
Summary of Contents for Dialogic Integrated Media Gateways IMG 1010
- Page 1 ® Dialogic IMG 1010 Integrated Media Gateway IMG 1010 Module Install Instructions Release 10.3.x / 10.5.x Dialogic Corporation www.dialogic.com Part # 07-8740-01 Page 1 of 6...
- Page 2 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9. Any authorized use of Dialogic's trademarks will be subject to full respect of the trademark guidelines published by Dialogic from time to time and any use of Dialogic’s trademarks requires proper acknowledgement.
-
Page 3: Important Note
("Dialogic") warrants to the original purchaser of this hardware product, that at the time of delivery the hardware product supplied hereunder will be free from defects in material and workmanship. This warranty is for the standard period set out on Dialogic's website at http://www.dialogic.com/warranties and is subject to all of the terms and limitations set out on the Dialogic website at... -
Page 4: Required Tools And Parts
Media Module Positions. ® Installing Dialogic IMG 1010 VoIP or Dialogic Position the module over the four standoffs on Dialogic Align the connectors on the module with the connectors on the motherboard and press together. See diagram below: Cautions: The connectors must be properly aligned and fully seated. - Page 5 Switch the power to ON (1) at rear of docking station. Configure Module. See Configuring Media or Configuring VoIP in the On-line Help Documentation on the Dialogic Technical Support web site: Diagram 1 - Removing Dialogic Dialogic Corporation ®...
- Page 6 Installing a Dialogic 1010 VoIP or Media Module Diagram 2 - Module Positions ® Important: If only one Dialogic IMG 1010 VoIP Module is to be installed, it must be at Position 0. See illustration below. Dialogic Corporation Part # 07-8740-01...
Need help?
Do you have a question about the Integrated Media Gateways IMG 1010 and is the answer not in the manual?
Questions and answers