Night Service / Night Ring; Paging; Park - NEC ML440 Quick Setup Manual

Night Service / Night Ring

Night Service is disabled by default.
You may be able to answer a call ringing the Paging system.
To activate or deactivate Night Service:
1. Press a specially-programmed Night Feature Key on your handset.
a) Your display shows the system's night mode status.
b) Your Night Feature Key is off when the system is in the day mode; on when the system is in the night mode.
2. Press to hang up.
END
To answer a call you hear ringing over the Paging system:
1. Press TALK .
2. Dial .
*0
a) If this doesn't answer the call, your system is using a Paging system that doesn't provide this feature.
3. Talk to the caller.

Paging

The capability to make a Page is enabled by default.
There are no Page Feature Keys assigned by default.
The ML440 handset cannot receive Paging announcements.
To make an Internal Paging Announcement:
1. Press TALK .
2. Dial .
*1
3. Dial the Page Zone number (1-7 or 0 for All Call)
a) You can now place a new call on the line.
To talk to the Page initiator (if you have a Page Feature Key):
1. Press the flashing Page Feature Key.
2. The page announcement stops and you connect over the Intercom to the Page initiator.
a) This feature does not apply to the IntraMail Park and Page feature.

Park

Park is available by default.
There are no Park Feature Keys assigned by default.
ML440 Wireless IP DECT Quick Reference Guide
DSX | | 31