Table of Contents
Advertisement
Trace Server
IP-Address:
Syslog Server
IP-Address:
Syslog Server Port:
Syslog Level:
Save and Reboot:
Save the entries on this page and immediately reboot the AP20 Access Point.
With DSX you would not normally have to do this.
Save:
Save all the entries on the page.
Cancel:
Cancel any new entries you have made to the on-screen settings. The settings
will return to their previously saved values.
Default Base Station:
Clicking this option erases all your custom programming in the AP20 Access
Point and returns all the options to their factory set default values.
Table 6: Firmware Update
The Firmware Update screen provides the options required for updating the ML440 handset and AP20
Access Point rmware. If new rmware becomes available, you can use a privately-hosted TFTP (Trivial
File Transfer Protocol) server for the update. For more on setting up your TFTP server and loading the
new rmware, go to Chapter 5 in the ML440 and AP20 System Installation Guide (NDA-31192).
Table 7: Country
Use the Country screen to specify the country in which the AP20 Access Point is installed. The only
applicable option for DSX is US/Canada.
ML440 Wireless IP DECT Quick Reference Guide
DSX |
| 45
Hide quick links:
Advertisement
Table of Contents
