Table of Contents
Advertisement
ML440 Wireless IP DECT Quick Reference Guide
30 | DSX |
Message Waiting
Message Waiting is available by default, but only in systems without voice mail installed.
To leave a Message Waiting:
1. Place Intercom call to co-worker.
2. Dial
, then press
8
a) The extension you call can be unanswered or busy.
To answer a Message Waiting:
1. Your ML440 Status LED flashes slowly when you have a Message Waiting.
a) You should also see the Missed Call icon at the top of the telephone display.
2. Press
and dial
TALK
a) The system cancels the Message Waiting if the extension you call is busy, doesn't answer, or is Do Not
Disturb.
b) If the extension you call doesn't answer, dial
c) If your Status LED continues to flash, you have additional messages waiting.
Microphone Mute
Microphone Mute is available in the ML440 handset by default.
To mute your handset's microphone:
1. While on a handset or speakerphone call, press
2. The Mute icon at the top of the handset display indicates that the microphone is muted.
a) To cancel Microphone Mute, press MUTE again.
b) Microphone Mute also cancels when you press
Monitor / Silent Monitor
Monitor / Silent Monitor is disabled by default.
To Monitor a call:
1. Place an Intercom call to the busy extension.
a) Listen for busy or busy/ring tone.
b) With IntraMail installed, you will hear a voice prompt rst.
2. Dial
.
6
3. Listen to the conversation in progress.
a) Caution: Monitor provides no warning tones prior to intrusion. Monitor may be interpreted as an invasion
of privacy.
to hang up.
END
.
*8
*8
to automatically leave them a Message Waiting.
on the side of your handset.
MUTE
END
to hang up.
Hide quick links:
Advertisement
Table of Contents
