Removing Lines And Extensions From Service; Ringdown Extension - NEC ML440 Quick Setup Manual

To join an outside call with a member of your Privacy Release Group:
1. Press the busy line key.
a) Id your co-worker has a keyset, their line key will be orange.
2. Your display shows
Conference Call
To prevent a member of your Privacy Release Group from joining your call:
1. Place or answer an outside call on a line key.
2. Press the line key.
a) If your co-worker has a keyset, their line key changes from orange to red.
3. Press the line key again to allow a co-worker to join in.
a) If your co-worker has a keyset, their line key changes from red to orange.

Removing Lines and Extensions From Service

Removing Lines and Extensions From Service is disabled by default.
To remove a line or extension from service:
1. Press .
TALK
2. Dial .
#40
3. Do one of the following:
a) Dial the number of the extension you want to remove from service (e.g., 302).
b) Dial the extension number of the line you want to remove from service (e.g., 101 for line 1).
4. Dial 6 to remove the line or extension from service.
a) At the extension removed from service, you see Out of Service.
b) The line key for a line removed from service will be on (red).
5. Press END to hang up.
To return a line or extension to service:
1. Press TALK .
2. Dial #40 .
3. Do one of the following:
a) Dial the number of the extension you want to remove from service (e.g., 302).
b) Dial the extension number of the line you want to remove from service (e.g., 101 for line 1).
4. Dial to return the line or extension to service.
4
5. Press END to hang up.

Ringdown Extension

Ringdown Extension is disabled by default.
Ringdown Extension requires that Prime Line Preference be None.
ML440 Wireless IP DECT Quick Reference Guide
DSX |
and you join the conversation on the line.
| 33