NEC ML440 Quick Setup Manual page 41

SIP Identity Status on this This eld shows the SIP details and status of each registered ML440 handset.
Base Station: Normally, each handset should be registered to the DSX system LAN IP address
on port 5060.
Table 2: Extensions
The Extensions screen is where you add, delete, register, and deregister ML440 handsets.
Idx The Idx is an internal reference number for the handset. You cannot change it.
You can click it to edit the extension parameters (the same as clicking Extension).
Extension This is the DSX extension number for the associated ML440 handset. You can
click it to edit the extension parameters (the same as clicking Idx).
Display Name The name you entered in the Add extension: Display Name is shown here. You
can enter anything you want for reference. After initial installation, the ML440
handset will use name programmed in the DSX in Stations: Con g: Setup: Type:
Name (2102-02) instead of your entry here.
IPEI The IPEI (International Portable Equipment Identi er) is a unique identi er
programmed into each ML440 handset. You cannot change it.
State When a handset is successfully registered with the AP20 and the system, this
eld will show SIP Registered@RPNxx (where RPNxx is the Radio Part Number
of the associated AP20 Access Point).
FW Info The ML440 handset rmware version displays in this eld.
FW Progress When you are updating the ML440 handset rmware, this eld shows the update
progress.
Add extension Click this option to add another ML440 handset. See Step 4. Program the AP20
Access Point on page 7 in the Installation Checklist for more.
Refresh Refresh the browser screen to update the extension status.
Check All Check (select) the boxes for all the extensions. Checked extensions can be
deleted, registered, or unregistered.
Uncheck All Uncheck (deselect) the boxes for all the extensions. Unchecked extensions
cannot be deleted, registered, or unregistered.
ML440 Wireless IP DECT Quick Reference Guide
DSX | | 41