NEC ML440 Quick Setup Manual page 12

ML440 Wireless IP DECT Quick Reference Guide
12 | DSX |
To default the AP20 database:
1. Plug the AP20 into a DSX IPA or 802.3af-2003 PoE device and wait for it to start up normally.
2. Locate the reset button on the upper right side of the AP20.
3. Using a pointed object such as a paper clip, press the reset button for about 10 seconds.
The Status LED will be orange for about 8 seconds and red for about 2 seconds.
4. Release the reset button. The AP20 will restart with the factory installed default database.