Line Schedules; Meet Me Conference - NEC ML440 Quick Setup Manual

2. Do one of the following
a) Press the line key for the busy line.
b) Dial the line's extension number (e.g., 101 for line 1).
3. When you hear busy tone, dial
a) Wait on the line without hanging up for Line Queuing.
b) Hang up for Line Callback.
4. When the line becomes free, do one of the following:
a) For Line Queuing, listen for outside dial tone and then place your call.
b) For Line Callback, you hear the Line Callback ring. If you answer the ring, wait for outside dial tone and
then place your call.

Line Schedules

Line Schedules are disabled by default.
There are no Skip Ahead or Manual Activation Feature keys assigned by default.
To activate a Manual Schedule:
1. Press the Manual Activation Feature Key.
a) The key is on when the assigned schedule has been manually activated.
2. When the programmed start time for the manually activated schedule occurs, the schedule will run.
To skip ahead to the next schedule entry:
1. Press the Skip Ahead Feature Key for the schedule.
a) The key is on when the Skip Ahead is activated.
2. The Skip Ahead Feature Key goes out when the schedule to which the system has skipped becomes current.

Meet Me Conference

Meet Me Conference is enabled by default.
To set up a Meet-Me Conference:
1. Page your co-workers and announce the Meet-Me Conference location code (#11 or #12).
2. Press Transfer (soft key 3).
3. Dial the announced Meet-Me Conference code.
a) Wait for your co-workers to join. You and your co-workers must join the conference within the Meet-Me
Conference time.
To join a Meet-Me Conference:
1. When you hear the Page announcing the Meet-Me Conference, press
2. Dial the announced Meet-Me Conference location code (#11 or #12).
a) You must join the conference within the Meet-Me Conference time.
ML440 Wireless IP DECT Quick Reference Guide
DSX |
and do one of the following:
2
TALK .
| 29