Home Automation Integration; Hotline - NEC ML440 Quick Setup Manual

ML440 Wireless IP DECT Quick Reference Guide
26 | DSX |
a) The line key flashes to indicate that it is on Hold. The line will recall if you leave it on Hold too long.
To place an outside call on Exclusive Hold:
1. Press (soft key 1) twice .
Hold
2. Press to hang up.
End
a) For you, the line key flashes while on Hold or recalling.
b) For your co-workers, the line key is on (red) while on Exclusive Hold and flashes slowly (red) while recalling.
To pick up an outside call you placed on Hold:
1. Press .
TALK
2. Press the flashing line key.
To pick up an outside call on System Hold at a co-worker's extension:
1. Press .
TALK
2. Dial .
*4
3. Dial the number of the line that is on Hold.
a) For example, dial
b) You must know the number of the line that is on Hold.
To place an Intercom call Hold:
1. Press (soft key 1).
Hold
2. Press End to hang up.
a) If you have a specially programmed Intercom Feature Key, the key flashes to indicate that it is on Hold. The
call will recall if you leave it on Hold too long.
To pick up an Intercom call you placed on Hold:
1. Press TALK .
2. You connect to the co-worker you placed on Hold.

Home Automation Integration

Home Automation Integration disabled by default.
Automation Feature Keys not assigned by default.
To directly control a Home Automation Integration device:
1. Press the Automation Feature Key.
2. The key lights when the control is active.

Hotline

There are no Hotline Feature Keys assigned by default.
for line 1.
01