Conference; Directed Call Pickup; Distinctive Ringing - NEC ML440 Quick Setup Manual

ML440 Wireless IP DECT Quick Reference Guide
22 | DSX |
b) By default, pressing
3. Dial outside number.
a) If the number doesn't dial out within 6 seconds, your system probably has Store and Forward enabled. Just
dial # to have the call go through right away.

Conference

Conference is enabled by default.
To set up a Conference:
1. Establish an Intercom or outside call.
2. Press the
Conf.
a) Your hear Intercom dial tone.
b) Your caller hears Music on Hold (if installed) while they wait for you to set up the Conference.
3. Do one of the following:
a) Dial extension you want to add.
b) Place or answer an outside call.
c) Retrieve a call from Park Orbit.
4. Press Conf. (soft key 2) to set up the Conference.
a) If you cannot add additional parties to your Conference, you have exceeded the system's Conference limit.
5. Repeat steps 2-4 to add additional parties to your Conference.
a) To optionally place a Conference on Hold, press
b) To retrieve the Conference from Hold, press
6. To exit the Conference, press
a) The remaining parties can continue their conversation uninterrupted.
b) If you were in Conference with two outside lines, this may set up a Tandem Call (Unsupervised Conference).

Directed Call Pickup

Directed Call Pickup is enabled by default.
To intercept a call ringing a co-worker's extension:
1. Press .
TALK
2. Dial ** .
3. Dial the number of the extension whose call you want to intercept.
a) To intercept a call ringing an attendant, dial the attendant's extension number (e.g., 301). Do not dial 0 or
01-04.

Distinctive Ringing

The capability to change ring tones and ring volume is built into the ML440 handset.
TALK and dialing 911
soft key (soft key 2).
.
END
will not call emergency services.
(soft key 1).
Hold
(to show the soft keys) and then press
TALK
(soft key 1).
Hold