Assembling And Installing The Frontbrake Master Cylinder - Yamaha T135SE Service Manual

1
1
FRONT BRAKE
3. Check:
9 brake master cylinder reservoir 1
Cracks/damage → Replace.
1
9 brake master cylinder reservoir diaphragm 2
Damage/wear → Replace.
2
4. Check:
9 brake hose 1
Cracks/damage/wear → Replace.
EAS00598
ASSEMBLING AND INSTALLING THE
FRONT BRAKE MASTER CYLINDER
w
99
Before installation, all internal brake com-
ponents should be cleaned and lubricated
with clean or new brake fluid.
99
Never use solvents on internal brake com-
ponents.
1. Install:
9 brake master cylinder 1
NOTE:
9 Install the brake master cylinder holder with the
mark facing up.
9 Adjust the brake master cylinder to the proper
angle.
9 First, tighten the upper bolt, then the lower bolt.
7-27
http://www.motorcycle.in.th
CHAS
Recommended brake fluid
DOT 3 or 4
11 Nm (1.1 m·kg, 8.0 ft·lb)