GENERATOR AND STARTER CLUTCH
1
2
1
3
6. Remove:
9 generator rotor 1
(with the flywheel puller 2 )
9 woodruff key
Flywheel puller
2
EAS00344
REMOVING THE STARTER CLUTCH
(T135SE)
1. Remove:
9 starter clutch idle gear shaft 1
9 starter clutch idle gear 2
9 starter clutch gear 3
9 washer
2. Remove:
9 starter clutch rollers 1
9 starter clutch spring caps
9 starter clutch springs
3. Remove:
9 starter clutch bolt
9 starter clutch 1
NOTE:
9 While holding the generator rotor
sheave holder, remove the starter clutch bolt.
9 Do not allow the sheave holder to touch the
projection on the generator rotor.
Sheave holder
4-40
http://www.motorcycle.in.th
ENG
90890-01362
90890-01701
2 with the