Checking The Friction Plates; Checking The Clutch Plates - Yamaha T135SE Service Manual

3
1
2
5
4
8
11. Remove:
6
7
EAS00280

CHECKING THE FRICTION PLATES

The following procedure applies to all of the fric-
tion plates.
NOTE:
Measure the friction plate at four places.
EAS00281

CHECKING THE CLUTCH PLATES

The following procedure applies to all of the
clutch plates.
4-52
http://www.motorcycle.in.th
CLUTCH
9 collar 1
9 clutch shoe housing 2
9 washer 3
9 rollers 4
9 cage springs 5
9 cage 6
9 clutch shoe housing boss 7
9 clutch shoe 8
1. Check:
9 friction plate
Damage/wear → Replace the friction plates
as a set.
2. Measure:
9 friction plate thickness
Out of specification → Replace the friction
plates as a set.
Friction plate thickness
2.5 – 2.7 mm (0.010 – 0.11 in)
<Limit>: 2.4 mm (0.0945 in)
1. Check:
9 clutch plate
Damage → Replace the clutch plates as a
set.
2. Measure:
9 clutch plate warpage
(with a surface plate and thickness gauge
1 )
Out of specification → Replace the clutch
plates as a set.
Clutch plate warpage limit
0.05 mm (0.0020 in)
ENG