Checking The Clutch Springs; Checking The Clutch Housing; Checking The Clutch Boss - Yamaha T135SE Service Manual

CLUTCH
EAS00282

CHECKING THE CLUTCH SPRINGS

The following procedure applies to all of the
clutch springs.
1. Check:
9 clutch spring
Damage → Replace the clutch springs as a
set.
2. Measure:
9 clutch spring free length a
Out of specification → Replace the clutch
springs as a set.
Clutch spring free length
40.5 mm (1.59 in)
<Limit>: 38.5 mm (1.52 in)
EAS00284

CHECKING THE CLUTCH HOUSING

1. Check:
9 clutch housing dogs
Damage/pitting/wear → Deburr the clutch
housing dogs or replace the clutch housing.
NOTE:
Pitting on the clutch housing dogs will cause
erratic clutch operation.
EAS00285

CHECKING THE CLUTCH BOSS

1. Check:
9 clutch boss splines
Damage/pitting/wear → Replace the clutch
boss.
NOTE:
Pitting on the clutch boss splines will cause
erratic clutch operation.
4-53
http://www.motorcycle.in.th
ENG