CHANGINGTHECOOLANT
8. Install:
9 copper washer
9 coolant drain bolt
9. Connect:
9 coolant reservoir hose
10. Fill:
9 cooling system
(with the specified amount of the recom-
mended coolant)
a
NOTE:
The specified amount of coolant is a standard
amount. Fill the cooling system with coolant until
coolant comes out of the air bleed bolt hole.
Handling notes for coolant
Coolant is potentially harmful and should be
handled with special care.
w
99
If coolant splashes in your eyes, thorough-
ly wash them with water and consult a doc-
tor.
99
If coolant splashes on your clothes, quickly
wash it away with water and then with soap
and water.
99
If coolant is swallowed, induce vomiting
and get immediate medical attention.
3-26
http://www.motorcycle.in.th
CHK
ADJ
7 Nm (0.7 m•kg, 5.0 ft•lb)
Recommended antifreeze
YAMAHAGENUINE COOLANT
High-quality ethylene glycol
antifreeze containing corrosion
inhibitors for aluminum engines
Mixing ratio
1:1 (antifreeze:water)
Quantity
Radiator capacity
0.62 L(0.55 Imp qt, 0.66 US qt)
Coolant reservoir capacity
0.28 L(0.25 Imp qt, 0.30 US qt)
Up to the maximum level mark
aa