FWD
1
COOLINGSYSTEM
EAS00475
ASSEMBLING THE WATER PUMP
1. Install:
9 water pump seal 1
NOTE:
Install the water pump seal with the special
tools.
å Push down.
2. Lubricate:
9 water pump seal 1
3. Install:
9 impeller
9 plate
NOTE:
9 Align the slit in the impeller shaft with the slot
of the plate.
9 After installation, check that the impeller shaft
rotates smoothly.
EAS00467
INSTALLING THE THERMOSTAT
1. Install:
9 thermostat 1
9 thermostat cover 2
9 bracket
NOTE:
Face the hole toward to the forward to install.
2
5-8
http://www.motorcycle.in.th
COOL
Mechanical seal installer
22
90890-04145
Middle driven shaft bearing driver
33
90890-04058
Recommended lubricant
Lithium soap base grease
10 Nm (1.0 m•kg, 7.2 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)