Checking The Clutch Pressure Plate; Checking The Clutch Push Rods; Checking The Primarydriven Gear - Yamaha T135SE Service Manual

CLUTCH
EAS00286
CHECKING THE CLUTCH PRESSURE
PLATE
1. Check:
9 clutch pressure plate
Cracks/damage → Replace.
EAS00288

CHECKING THE CLUTCH PUSH RODS

1. Check:
9 clutch push rod #1
Cracks/damage/wear → Replace the clutch
push rod #1.
9 clutch push rod #2
Cracks/damage/wear → Replace the clutch
push rod #2.
2. Measure:
9 clutch push rods bending limit
Out of specification → Replace the clutch
push rod.
Clutch push rods bending limit
0.5 mm (0.0197 in)
EAS00292
CHECKING THE PRIMARYDRIVEN
GEAR
1. Check:
9 primary drive gear
(on the clutch shoe housing)
9 primary driven gear
(on the clutch housing)
Damage/wear → Replace the clutch shoe
housing and clutch housing as a set.
Excessive noise during operation
Replace the clutch shoe housing and clutch
housing as a set.
4-54
http://www.motorcycle.in.th
ENG
→