VALVES AND VALVE SPRINGS
j. Measure the valve seat width
the valve seat width is out of specification,
reface and lap the valve seat.
EAS00241
CHECKING THE VALVE SPRINGS
The following procedure applies to all of the
valve springs.
1. Measure:
9 valve spring free length a
Out of specification
spring.
2. Measure:
9 compressed valve spring force a
Out of specification
spring.
b Installed length
3. Measure:
9 valve spring tilt a
Out of specification
spring.
4-28
http://www.motorcycle.in.th
ENG
→ Replace the valve
Valve spring free length
Intake and exhaust valve
springs
47.33 mm (1.86 in)
<Limit>: 44.96 mm (1.77 in)
→ Replace the valve
Compressed valve spring force
(installed)
Intake and exhaust valve
springs
135.6 – 156.0 N
(13.83 – 15.91 kgf) at 24.2 mm
→ Replace the valve
Spring tilt limit
Intake and exhaust valve
springs
2.0 mm (0.08 in)
c again. If