FRONT WHEELAND BRAKE DISC
EAS00542
INSTALLING THE FRONT WHEEL
1. Lubricate:
2. Install:
NOTE:
Make sure the projection a on the speedometer
gear unit fits between the projections on the
outer tube.
3. Tighten:
4. Connect:
NOTE:
Be sure that slit
meshes with the projection b on the speedome-
ter gear unit 2 .
w
Make sure the brake cable is routed properly.
cC
Before tightening the wheel axle nut, push
down hard on the handlebar several times
and check if the front fork rebounds smooth-
ly.
7-7
http://www.motorcycle.in.th
CHAS
9 wheel axle
9 wheel bearings
9 oil seal lips
9 speedometer gear unit
Recommended lubricant
Lithium-soap-based grease
9 brake disc
9 front wheel
Refer to "CHECKING THE BRAKE DISC".
9 wheel axle nut
40 Nm (4.0 m·kg, 29 ft·lb)
9 speedometer cable 1
a on the speedometer cable