Yamaha T135SE Service Manual page 253

FRONT BRAKE
5. Fill:
9 brake master cylinder reservoir
(with the specified amount of the recom-
mended brake fluid)
Recommended brake fluid
DOT 3 or 4
w
99
Use only the designated brake fluid. Other
brake fluids may cause the rubber seals to
deteriorate, causing leakage and poor brake
performance.
99
Refill with the same type of brake fluid that
is already in the system. Mixing brake fluids
may result in a harmful chemical reaction,
leading to poor brake performance.
99
When refilling, be careful that water does
not enter the brake master cylinder reser-
voir. Water will significantly lower the boil-
ing point of the brake fluid and could cause
vapor lock.
cC
Brake fluid may damage painted surfaces
and plastic parts. Therefore, always clean up
any spilt brake fluid immediately.
6. Bleed:
9 brake system
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in chapter 3.
7. Check:
9 brake fluid level
a
Below the minimum level mark
the recommended brake fluid to the proper
level.
Refer to "CHECKING THE BRAKE FLUID
LEVEL" in chapter 3.
8. Check:
9 brake lever operation
Soft or spongy feeling
system.
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in chapter 3.
9. Install:
9 headlight assembly
Refer to "REMOVING THE HEADLIGHT
ASSEMBLY" in chapter 3.
7-23
http://www.motorcycle.in.th
CHAS
a → Add
→ Bleed the brake