Cisco 7961G Administration Manual page 91

Chapter 4 Configuring Settings on the Cisco IP Phone
Table 4-2 Network Configuration Menu Options
Option Description
DHCP Server IP address of the Dynamic Host
Configuration Protocol (DHCP)
server from which the phone obtains
its IP address.
BOOTP Server Indicates whether the phone obtains
its configuration from a Bootstrap
Protocol (BootP) server instead of
from a DHCP server.
MAC Address Unique Media Access Control
(MAC) address of the phone.
Host Name Unique host name that the DHCP
server assigned to the phone.
Domain Name Name of the Domain Name System
(DNS) domain in which the phone
resides.
Cisco IP Phone Administration Guide for Cisco CallManager, Cisco IP Phone 7961G/7961G-GE and 7941G/7941G-GE
OL-6966-01
For information about how to access the Network Configuration menu, see the
"Displaying a Configuration Menu" section on page
Before you can change an option on this menu, you must unlock options as
described in the "Unlocking and Locking Options" section on page
Yes, or No softkeys for changing network configuration options appear only if
options are unlocked.
For information about the keys you can use to edit options, see the
Values" section on page 4-4.
To Change
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Unlock network configuration options.
1.
Set the DHCP Enabled option to No.
2.
Scroll to the Domain Name option,
3.
press the Edit softkey, and then enter a
new domain name.
Press the Validate softkey and then
4.
press the Save softkey.
Network Configuration Menu
4-2.
4-3. The Edit,
"Editing
4-7