Overview Of Options Configurable From A Phone - Cisco 7961G Administration Manual

Chapter 4 Configuring Settings on the Cisco IP Phone
Note

Overview of Options Configurable from a Phone

Note
Table 4-1 Options Configurable from a Cisco IP Phone
Category Description
DHCP settings Dynamic Host Configuration Protocol (DHCP)
automatically assigns IP address to devices when
you connect them to the network.
Cisco IP Phones enable DHCP by default.
Cisco IP Phone Administration Guide for Cisco CallManager, Cisco IP Phone 7961G/7961G-GE and 7941G/7941G-GE
OL-6966-01
The Cisco IP Phone provides several methods you can use to reset or restore
option settings, if necessary. For more information, see the
Restoring the Cisco IP Phone" section on page
Related Topics
Displaying a Configuration Menu, page 4-2
•
Unlocking and Locking Options, page 4-3
•
Overview of Options Configurable from a Phone, page 4-5
•
• Network Configuration Menu, page 4-6
Device Configuration Menu, page 4-15
•
The settings that you can change on a phone fall into several categories, as shown
in Table 4-1. For a detailed explanation of each setting and instructions for
changing them, see the
There are several options on the Network Configuration menu and on the Device
Configuration Menu that are for display only or that you can configure from
Cisco CallManager. These options are also described in the
Configuration Menu" section on page 4-6
section on page 4-15.
Overview of Options Configurable from a Phone
"Network Configuration Menu" section on page
or the
"Resetting or
9-16.
"Network
"Device Configuration Menu"
Network Configuration Menu
Option
DHCP Enabled
DHCP Address Released
4-6.
4-5