Cisco 7961G Administration Manual page 64

Configuring the Cisco IP Phone 7961G and 7961G-GE to Support the Cisco IP Phone 7914 Expansion Module
To configure the Cisco IP Phone 7961G and 7961G-GE to support the
Cisco IP Phone 7914 Expansion Module, perform the following steps.
Procedure
Log in to the Cisco CallManager Administration application.
Step 1
The Cisco CallManager Administration page appears.
From the menu, choose Device > Phone.
Step 2
The Find and List Phone page appears. You can search for one or more phones
that you want to configure for the Cisco IP Phone 7914 Expansion Module.
Select and enter your search criteria and click Find.
Step 3
The Find and List Phone page reappears showing a list of the phones matching
your search criteria.
Click the IP Phone that you want to configure for the
Step 4
Cisco IP Phone 7914 Expansion Module.
The Phone Configuration page appears.
Step 5 Scroll to the Expansion Module Information section of the page.
To add support for one expansion module, in the Module 1 field, select
Step 6
7914 14-Button Line Expansion Module.
To add support for a second expansion module, in the Module 2 field, select
7914 14-Button Line Expansion Module.
In the Firmware Load Information section of the page, there are two fields for
specifying the firmware load for Modules 1 and 2. You can leave these fields
blank to use the default firmware load.
Scroll to the top of the page and click Update.
Step 7
A message appears asking you to reset the phone for the changes to take effect.
Click OK.
Click Reset Phone for the changes to take effect.
Step 8
Cisco IP Phone Administration Guide for Cisco CallManager, Cisco IP Phone 7961G/7961G-GE and 7941G/7941G-GE
2-16
Chapter 2 Preparing to Install the Cisco IP Phone on Your Network
OL-6966-01