System Menu - Qvis Iapollo SMART NVR User Manual

Please refer to the following sheet for monitor window parameter information:
Parameter
Display device
information
Digital zoom
Change show
mode
Local record
Snapshot
Audio
Close video

6.2.2 System Menu

System menu is shown as in Figure 6-8.
Please refer to Chapter 6.4 Configuration, Chapter 6.5 Search, Chapter 6.6 Alarm, Chapter 6.7
About, Chapter 6.8 Log out for detailed information.
© Copyright Qvis ®. All documentation rights reserved.
Figure 6-7 Real-time Monitor
Function

1: NVR IP address.

2: Channel number.

3: Bit stream.

4: Bit stream decode type.

S1: Overlay.

S2: Off stream.

S3:GD1

H1: Overlay

H2: off stream decoding from the display card.
Click this button and then left drag the mouse in the zone
to zoom in. Right click mouse system restores original
status.
Resize or switch to full screen mode.
When you click local record button, the system begins
recording. The recorded file is saved to system folder: \
RecordDownload(default).
You can snapshot during important videos. All images are
memorized in system folder: \ picture download (default).
Turn on or off audio.
Close video in current window.
Figure 6-8 System Menu
88