Table of Contents
Advertisement
10
Backup
11
Clip
Record
12
In any play mode, the time bar will change once you modify the search type.
type
Smart
13
search
Other channel
14
synchronization switch to play
when playback
15
Digital zoom
Manually switch channel
16
when playback
Note:
All the operations here (such as playback speed, channel, time and progress) is dependent on
what hardware spec you are running.
© Copyright Qvis ®. All documentation rights reserved.
The time bar is begins at 0 o'clock when you are setting the
configuration. The time bar zooms in to the period of the current
playback time when you are playing the file.
Select the file(s) you want to backup from the file list. System supports
files from up to four channels. Then click the backup button, now you
can see the backup menu. Click the start button to begin the backup
operation.
Check the file again, if you want to cancel current selection.
System support can display up to 32 files from one channel.
This button allows you to edit the file.
Please play the file you want to edit and then click this button. You can
see the corresponding slide bar in the time bar of the corresponding
channel. You can adjust the slide bar or input the accurate time to set
the file end time. Click this button again and then save current contents
in a new file.
When the system is playing footage, you can select a zone in the
window to begin motion detect. Click the motion detect button to
begin play.
Current button is null once the motion detect play has begun.
The system will take the whole play zone as the motion detect
region by default.
The motion detect play function stops once you have switched the
play file.
To set the time bar, click the play button, or any file within the list and
operation will stop current motion detect play.
Other Functions
When playing the file, click the number button and
system will then switch to the same period of the
corresponding channel (it will continue to play).
When the system is in full-screen playback mode, left
click the mouse in the screen, drag your cursor on the
screen to select a section and then left click mouse to
display the digital zoom tool. You can right click
mouse to exit.
During the file playback process, you can switch to
other channels via the dropdown list or rolling the
mouse.
This function is null if there is no record file or system
is in smart search process.
15
Advertisement
Table of Contents
