Table of Contents
Advertisement
4.6.5.1
Network Setting
Network setting interface is shown in Figure 4-32. Please draw a circle to enable the
corresponding function and then double click the current item to go to the setup interface.
4.6.5.2
IP Filter
The IP filter interface is shown in Figure 4-33. You can add the IP in the following list. The list
supports a maximum of up to 64 IP addresses. IPv4 and IPv6 are the valid supported addresses
used by the system. Please note system needs to check the validity of all IPv6 addresses.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-32
Figure 4-33
34
Advertisement
Table of Contents
