Table of Contents
Advertisement
Manual add: Click it to add the IPC manually. The port number is 37777. The default user
name is admin and password is admin.
Click the Manual Add button; you can go to the following interface (see Figure 4-73).
This NVR product supports up to a maximum of 32-channel at standard definition. High
definition video/non-real-time video has a transmission rate of 1Mbps per channel. It can also
support up to a 4-channels of high definition video with a transmission rate of 8Mbps. The delay
time of each channel is below 500ms.
Model
System Performance
16-ch series
Max support 16-channel video.
Support 4-channel 1080p/5Mbps (extra stream D1/1Mbps), 8-channel
720p/2Mbps (extra CIF/640kbps), 16-channel D1/1Mbps.
This NVR supports IP Cameras from the Qvis range. You can just need to input the URL address,
user name, and password to login the front-end device.
In the following interface, you can see there are three connection modes: auto, TCP (default) and
UDP.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-73
64
Advertisement
Table of Contents
