Table of Contents
Advertisement
6.3 WAN Login
In WAN mode, after you log in, the interface is shown as below (see Figure 6-14).
Please refer to the following content to understand the LAN and WAN login differences.
1. In WAN mode, system opens the main stream of the first channel, to monitor by default.
The open/close button on the left pane is null.
2. You can select different channel and different monitor mode at the bottom of the interface
(see Figure 6-15).
© Copyright Qvis ®. All documentation rights reserved.
Figure 6-14
Figure 6-15
93
Advertisement
Table of Contents
